(1 Barrel Brew System)
Alpha Ruby Street 1 Barrel Natural Gas Brewing System
Now Offering Free Shipping!
Lower 48 States Only
Because these are built to order please allow 4 weeks for delivery
Designed as a Nano Brewery / Pilot Brewery, this system features 45 Gallon Kettles and will brew a true 1 bbl (31.5
gallon) batch. Featuring two stainless pumps and all 1.5" tri-clover connections, this brewery has found its niche as an
economical option for both brew pubs and garage fanatics.
Complete System Includes:
1-Frame - Welded Steel Construction (powder-coated)
3-50 Gallon Stainless Steel Kettles (with lids and internal volume marks)
3-10" Cast Iron Burners (with gas manifold & regulator)
2-Wall to Wall Stainless Steel False Bottoms
2-Stainless Steel Pumps (with remote on/off switches)
2-Thru Wall Return Fittings (mash tun & boil kettle)
All SS Tri-clover Fittings & Silicone Tubing
Complete Owner’s Manual (with 1 year limited warranty)
Power Supply Options/Requirements:
Natural Gas – Pressure Requirement - 11” W.C. / Minimum Supply – 1.25”
Digital Control Option (gas systems only) – 110-120 VAC (50-60Hz) – 220v conversion available for international
Pump(s) - 110-120 VAC (50-60Hz) – 220v pumps available for international
System - 82.5” wide x 32” deep x 48” high – with kettles
Kettles (50 Gallon)
All Alpha burners can later be converted to natural gas or propane.
Optional HERMS Conversion Kit:
HERMS - (Heat Exchange Recirculating Mash System)
Many brewers are choosing HERMS as an option to maintain mash temperatures and perform step mashes without direct fired heat. Our HERMS coil option offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun. The coil is factory installed only and pressure tested before it ships.
(Recirculating Infusion Mash)
The ability to recirculate your mash is standard on Ruby Street Systems with or without the optional digital controller system. Controlling the temps on your mash can be done manually, but with the digital controller these temps are controlled, firing your burner automatically, and is highly recommended.
Many brewers are choosing the recirculating infusion mash systems an option to maintain mash temperatures and perform step mashes by applying direct heat to the mash tun from a burner, either fueled by propane or natural gas. The pump keeps the wort recirculating fast enough so that there are no worries about scorching the wort. The pump runs continuously during the mash and the heat, the flame is cycled on and off by a Digital Controller to maintain the set temperature in the mash. Ruby Street also offers their own newly designed Digital Controller, please see the option.
Optional Digital Control Package:
Ruby Street now has designed their own Digital Controller for their systems. Made from the highest quality components available right here in the USA!
Digital Control Package will include:
- Digital Control Panel and Bracket (1)
- Sensor Cables (2)
- Ignition Coil Box (1)
- Solenoid Valves (3)
- Temperature Sensors (3)
- Burner Electrodes (3)
The digital control package also works with the HERMS option.
Optional HLT Thru-wall Return Fitting
Many brewers prefer to re-circulate and/or sparge with the kettle lids on. The thru-wall return fitting option makes this process easy. This fitting is generally mounted at the top of the kettle just below the rim.
Thru-wall fittings mounted in HLT kettle will include a silicone tube that reaches the bottom of the kettle to prevent splashing.
Please see the options for these options.
Optional Inline Oxygen Package
A fast and easy way to oxygenate your cooled wort. Equipped with stainless triclover fittings, this inline oxygen stone can be placed on the outflow side of your pump or chiller. Includes a regulator that attaches to a standard welding oxygen tank and 6’ of vinyl tubing.
Optional Whirlpool Arm
If you would like a whirlpool arm assembly added to your boil kettle please see the options.
- 3 piece ball valve w/tri-clamp connection.
Optional Plate Chiller Package
Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.
· Duda Brand 30 Plate all Stainless Chiller mod# B3-36A
· Bracket to fit any of our frames powder coated to match
· Mounting hardware
· Tri Clover wort connections with 3” dial outflow thermometer
· Male and female garden hose fittings on water side of chiller
· Can be sold and shipped with Ruby Street systems and frames.
Optional Stainless Steel Hop Filter
The hop filter makes cleaning your brewery a breeze. The large capacity 6" x 14" 300 micron screen is made of 100% stainless steel. These screens will contain the majority off all hop material from both whole hops and pellet hops. We highly recommend this option when using plate chillers to avoid trapped hop material in your chiller. You can also recirculate through the hop filter while chilling to capture cold break protein material.
Optional Color Choices:
Ruby Street Brewing now offers an option for several different colors, please click the link below to view the different colors they now offer. The cost for this is $199.00
If you wish to choose another color other than their standard red, please use the text box below in the add on section and enter the color code from the link above in the text box during your purchase. Please allow approximately 3 weeks lead time for this option.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.