Brewing Using One Ot The All Grain Brewing Methods

Brewing Using One Ot The All Grain Brewing MethodsIf you’re new to all-grain brewing, you may have heard about infusion mashing, step mashing, and decoction mashing techniques and wondered what all the fuss is about. Don’t let the jargon confuse you. These are just 3 all grain brewing methods you can use to mash your malted grains to extract fermentable sugar. (If you’re not ready for brewing all-grain yet, you may want to check out our Introduction to Partial Mash Brewing.)

Let’s see if we can shed some light on the three mashing processes:

Single Step Infusion Mash

A single step mash is the most basic style of all grain mashing. It simply involves soaking the crushed grains in water at a steady temperature for a specified period of time. Most homebrewers mash for about 60 minutes, though in theory 30 minutes should do the trick.

This process, called conversion, allows naturally occurring enzymes in the grains to break down the starches into fermentable sugar. One of the cool things about mashing is that by controlling the temperature of the mash, you can change the fermentability of the wort. By mashing in the lower end of the temperature range (around 148°-152°F), you achieve a more fermentable wort, and ultimately a drier beer. Mashing your grains in the upper end of the spectrum (152°-158°F) creates a less fermentable wort and a sweeter beer. Since I don’t have a very advanced brewing system, I’m usually happy just keep the mash in the 150°-154°F ballpark.

Brewers have the option of raising the mash at the end for the mash out. Bringing the mash up to about 170°F will stop enzymatic activity and make it easier to run off the wort.

Multiple Step Infusion Mash

Shop Brew KettelsThis all grain brewing method is often used when brewers need to break down proteins in the malt. This is only necessary when using under-modified lager malts. Because under-modified haven’t germinated as much during the malting process, a protein rest is used to allow enzymes to break down proteins in the grain. In a protein rest, the mash is usually held at around 122°F for 15-30 minutes, and then the mash is raised to conversion temperature (the temperature at which starches are broken down into fermentable sugars). The protein rest generally improves head retention and reduces haze when brewing with under-modified malts and unmalted adjunct grains.

Once again, brewers may want to raise temperature for mash out at the end of the multiple step mash.

Decoction Mash

Of the 3 all grain brewing methods mentioned here, decoction mashing is the most traditional brewing technique. It was developed by brewers who had a lack of temperature control. Brewers would remove a portion of the mash, boil it, and add it back into the mash. They might repeat this up to three times. These brewers found that the decoction process allowed them to bring the mash through each of the various rests and end up with a fermentable wort.Shop All Grain System

Today, since we have thermometers and other methods of temperature control, decoction mashing isn’t really necessary, though some brewing still use decoction mashing for brewing certain traditional styles.

So there you have it: Ales use single step mashing, lagers use multiple steps, and decoction mashing is an option for brewing certain traditional styles.

Which of these all grain brewing methods do you prefer?

----- David Ackley is a beer writer, brewer, and self-described "craft beer crusader." He holds a General Certificate in Brewing from the Institute of Brewing and Distilling.

Category_beer brewing tips

Featured products

Save $10.00

Product's name

$77.00 $87.00
2 reviews
Only 1 unit left
Save $10.00

Product's name

$77.00 $87.00
2 reviews
Only 1 unit left